Caratteristiche del prodotto Delta P VR3 HD Single Colour

Delta P VR3 HD Single Colour:

The Worlds First Upgradeable, Best-Selling Trimix and Closed Circuit capable Dive Computer! NOAA Approved.

VR Technology Limited are proud to announce a brand new VR3 model for 2008 armed with High Definition (HD) software giving enhanced screen visibility and some exciting new options as standard.

In addition to the vast range of features that VR3 owners have enjoyed to date, the new 2008 model gives the diver:

Outstanding screen visibility via a backlit white screen on all VR3s, both single and multi-colour units;
PIN upgradeability from Single Colour to Multi Colour;
A free of charge 3 dive Multi Colour trial for Single Colour VR3 owners;
Faster and more user-friendly screen navigation process;
A new Mini-Screen Pre-dive Check feature;
A revolutionary interactive Display Modes feature allowing the diver to choose which information is displayed on the dive screen, and thus
A unique User-Customisable Dive Screen, AND
A very user friendly new Dive Profile and Look Ahead Graphic feature on the Dive Screen


Display Modes Screen

The Display Modes screen is a revolutionary unique feature which is new in 2008 VR3s. For the first time, a diver can choose which information he sees in his primary dive screen and customise it to his own preferences. The VR3 is the only computer that allows a diver to do this.

It is accessible via the Mini-Screen Feature in the Home Screen.

This screen offers you the opportunity to decide which information appears in your primary dive screen. Check the options you require and leave unchecked the information you don-t require. All checked options will be shown in the dive screen. (Note: you must choose your preferences; you cannot check everything as there is insufficient space in the screen!)

A short push of both switches moves the highlight from one setting to the next, a short push of either switch will check or uncheck as required.

An Explanation of the Options in the Display Modes Screen

Flip

Flip - turns the screen in 180 degrees.

An upward arrow positions the screen for use on a divers left arm, A downward arrow configures the screen for use on a divers right arm.

Deco - gives you decompression information on the dive screen. If you do not require this uncheck the option.

MaxD - gives you a reading on the primary dive screen of the maximum depth reached on the dive so far

AvgD - gives you a reading on the primary dive screen of the average depth on the dive so far, (for on the fly decompression calculation by those who use this technique.)

nst - adds No Stop Time information to the primary dive screen

C (or F) - adds An Ambient Temperature reading to the primary dive screen

cns - adds information on your current CNS loading to the primary dive screen

tts - adds Time To Surface information to the primary dive screen

Ceiling Icon - gives you an accurate reading of your current ceiling depth. Use this along with the diver-on-the-line feature to ascend -following the curve-.

The New Home Screen features

The current active gas, (top left hand corner)
The current remaining battery voltage, (bottom left)

A BAT LOW advisory which appears when the battery voltage drops to 1.1V and an alkaline battery is being used or 2.8V when a 3.6V battery is being used.
The Pre Dive Check mini screen feature, (on Start Up the log screen shows first, giving you a profile of your most recent dive.)

A gas bottle graphic in the bottom left corner
A menu graphic in the bottom right corner
A GO graphic in the centre at the bottom
When the VR3 is sleeping and the Home Screen is still active, only the selected Mini Screen, active gas and a flashing BAT LOW warning will show.

Pre Dive Check

The Mini Screen feature in the Home Screen is designed primarily to make it easy for you to check the settings in your VR3 and allow you to change any of the settings if necessary before you dive.

A short push on either the right or left switch will allow you to move through the mini screens one by one. A short push of both switches will expand whichever mini screen is currently showing and allow you to change settings within the screen.

The mini screens appear in the following order with successive short pushes of the right hand switch

Log
Gas List
Dive Options
Fly Time
Set Up
Display Modes
Time & Date
No Stop Plan
Gas Calculator (a PIN upgrade option: see Gas Calculator Section)
Oxygen Sensor (a PIN upgrade option: see Rebreather Link and Oxygen Analyser sections)

A long push of the left hand switch at any time in the Home Screen will take you into the Gas List so you can set up, select or adjust the gas mixes you are planning to dive with as well as set your computer to open circuit or closed circuit decompression calculations.

A long push of the right hand switch will take you into the Options Menu which will give you access to five further features